A full wall in a narrow foyer
A floor-to-ceiling mirror doubles the sense of depth in a long entry hall and bounces light from the living room.
Enjoy 5% off through November 30.
Fill out the form and our team will contact you shortly.
Morningside Heights
That empty stretch above the sink looks like a good place for another shelf, until you realize the wall behind the tile is a mystery and the mirror you're planning might leave nowhere for the brackets.
For custom glass morningside heights projects, we make mirrors and shelving to fit the space, then check how each piece will be supported.
On-site measurement, custom fabrication and coordinated installation
A standard mirror can leave awkward gaps around a vanity. Custom sizing helps, but the small measurements count. Where does the light fixture sit? Is the cabinet centered on the sink, or slightly off? Will the mirror edge finish beside the wall tile, or extend over it?
For custom mirrors in Morningside Heights, we discuss flat-polished and beveled edges and mounting options. A bevel adds a decorative border; a flat edge is less visually busy. For a mirror near open shelving, that difference is worth seeing before you order.
Fixed panels, hinged doors and sliding enclosures cut to the actual opening.
Learn more
Renovated prewar bathrooms often leave an opening that is not square, with a curb or tub that slopes toward the drain.
Fixed panel, hinged door, sliding enclosure or a neo-angle layout, in clear, low-iron or frosted tempered glass.
We laser-measure after tile is finished, so every panel is cut to the real walls and curb.
An enclosure that fits the room, hardware in the finish you chose and a 2-year project warranty.
Three situations we see often on the Morningside Heights, each with a different size, edge and mounting.
A floor-to-ceiling mirror doubles the sense of depth in a long entry hall and bounces light from the living room.
Small bathrooms need mirrors cut around medicine cabinets, sconces and tile lines, not a stock size.
Large panels joined with tight seams, mounted for safety in a spare room or a townhouse basement.
Board rules, alteration agreements and set work hours planned before the install date.
Service elevator booking and COI for the managing agent, sent ahead of delivery.
Stair railings, garden-level doors and glass walls across several floors.
Older walls and floors that need on-site measurement and custom fitting.
We walk you through each choice at the consultation and bring samples so you can compare in your own light.
Clear, low-iron or frosted tempered glass, chosen for the room and how much tint you want to see.
Frosted or partly frosted panels where you need privacy and still want light.
Polished, beveled or flat edges, matched to the style of the room.
Hinges, clamps and handles in the finish you pick, with tempered safety glass.
We talk through the room, your ideas and the building rules.
Laser measurement on site once the walls and tile are ready.
Glass, edges and hardware options with a clear written quote.
You approve the drawing, finishes and the install window.
Glass is cut and tempered to the confirmed measurements.
Our team installs and coordinates access with your building.
How to clean the glass and look after the hardware.
We work the same way in Lenox Hill, Yorkville and Carnegie Hill. The full list of areas we cover is on the Manhattan page.
Storage is where a glass shelf earns its place, provided it is planned for what you intend to put on it.
Our work also includes:
For glass shelves in Morningside Heights, we’d ask about the objects they need to hold before choosing thickness or fixing hardware. Perfume bottles and heavy bathroom supplies make different demands. We won’t promise a weight limit without checking the installation.
Clear glass keeps the wall behind a shelf visible. Frosted glass softens that view, but also hides some of the detail you might want to see. Exposed edges and mounting hardware need attention.
Do the brackets need to match a brushed faucet? Would you prefer fewer visible fittings? Bring a room photo. Similar-sounding finishes can look different side by side.
Browse our project portfolio for mirror, shelf, and bathroom glass examples. Point out a clean mirror edge or discreet shelf support you like.
An example isn’t a specification, though. The wall construction and available fixing points at your property still decide what can be installed.
Before fabrication, we measure the finished opening and inspect the surfaces involved. A shelf mounted into suitable structural backing calls for a different approach than one proposed over an unknown hollow wall. Tile alone doesn’t tell us what’s behind it.
We review bracket positions, shelf depth, and installation access. If your building requires delivery arrangements or insurance documentation, mention it when you inquire. We’ll plan around your property’s requirements.
Tell us where the mirror or shelf will go. Share the approximate dimensions, photos showing the entire wall, and what you hope to store or display. We’ll identify what needs checking before quoting custom glass installation in Morningside Heights.
Project inquiry checklist
| You provide | We verify |
| Wall photos, rough dimensions, fixture locations | Final measurements and cutouts |
| Intended shelf use and preferred depth | Substrate, fixing points, and suitable supports |
| Mirror edge and hardware preferences | Material and finish compatibility |
| Building rules and target schedule | Delivery access and installation arrangements |
Request your project estimate with the information you have. Unknown wall construction? Say so; that’s something to investigate, not guess.
Its construction, condition, and available fixing points, along with the shelf design and intended load. We need to verify the substrate and hardware before confirming a suitable installation.
Mirror or glass dimensions, edge work, cutouts, supports, and site conditions all affect pricing. An unusually shaped mirror or complicated mounting arrangement can add fabrication or installation work.
Send an overall wall photo, close-ups of fixtures or obstructions, and approximate width and height. For shelving, include the proposed depth and what you plan to place on it.
Once we confirm the scope, field measurements, materials, and building access, we coordinate fabrication and agree on an installation date.
Tell us about the room and what you have in mind. Send photos, rough dimensions or plans and we will come back with options and a free estimate.

Custom Glass in Sutton Place